Product Details

Commercial Grade Plywood

By using selected species of Hard wood, commercial grade plywood is free from borers. It can be used for interior purposes like furniture partitions, counters etc. Because of the management’s commitment towards development, implementation and continual improvement in quality our brands are growing in market share.

Commercial Grade :
  • IS 303 Grade.
  • Selected species of Hard wood.
  • Anti-warping.
  • Termite and fungus resistant.
  • Pressed at specific basic pressure of 11Kg/cm² for commercial grade at 100°C
  • Chemically treated.
  • Melamine Urea Formaldehyde Resin.
  • Can withstand 10 hours of continuous boiling at 100°C.

Technical Specification

Properties Specified as per IS:303
Adhesive used for Bonding as per IS 848:1974
Preservative treatment for plywood as per IS 5539:1990
Length of plywood (tolerance) +6 mm, -0 mm
Width of plywood (tolerance) as per IS 848:1974
Thickness (tolerance) (1) Less than 6mm: +10%
(2) 6mm and above: +5%
Squareness 0.2%
Edge straightness 0.2%
Glue Sheer Strength of plywood Dry State - 1350 N Min Avg
- 1000 N Min Individual
Mycological - 1000 N Min Avg
- 800 N Min Individual
Wet State - 1000 N Min Avg
- 800 N Min Individual

Marine Grade Plywood

Marine Plywood is made out of highest quality hard wood. Its extremely rigid and can face any kind of wear and tear. It is dimensionally stable making it an ideal plywood for making high quality furniture, partitions etc.

  • Heavily extended with 5% Phenol.
  • Phenol Formaldehyde Resin used.
  • Density of species of wood used range from 500-600 Kgs. per cubic metre (Air dry weight).
  • Boiling water proof (BWP) at 100°C.
  • Treated with copper chromic preservatives.
  • Anti-warp and fungus resistant.
  • Pressed at specific basic pressure of 14 Kg/cm² for Marine Grade.
  • Manufactured from quality hard wood.
  • Weather Resistant.
  • Longevity & Stability.
  • Manufactured under strict supervision.

Technical Specification

Product 100% Hardwood
Density 850 kgs/cbm
Average glue shear strength in Dry state 1150 n/mtr.
Average glue shear strength in wet state 900 n/mtr.
Bending strength parallel to face grain 700kg/cm²
Bending strength per particular to face grain 400kg/cm²
Screw holding strength Above 250 kgs.
Nail holding strength Above 70 kgs.

Shuttering Plywood

Shuttering Plywood is made out of select hard wood species and imported veneer of uniform quality. These veneers are dried and bonded with high quality phenol formaldehyde BWP grade resin, under controlled temperature & pressure. Plywood is vacuum pressure treated with chemical preservatives to ensure absolute protection against termites, borers & fungus.

Application : Concrete shuttering work, boxes for concrete columns, beams, slabs, wall, tanks, bridge, silos, mezzanine floors, truck and bus body building, kitchen cabinets, cooling towers and other exteriors.

Advantages :
  • Available as per ISI specifications.
  • Wide range: Plain coated & Film Faced.
  • Semi densified or hi-densified.
  • Proves to be very economical because it can be used repeatedly.
  • Lends a smooth surface to the concrete work and requires very little additional plastering.
  • Scores over steel sheet in extreme hot & cold climate.

Technical Specification

Specific gravity 0.65 to 0.75
Nail Holding strength Above 100 kg.
Screw Holding Strength 250 kg.
Bending strength Along the grain 450 kg. F/cm²
Bending strength Across the grain 350 kg. F/cm²
Tensile Strength Along the grain 450 kg. F/cm²
Tensile Strength Across the grain 280 kg. F/cm²
Moisture Content 8-10%
Boiling water 72 Hr. at 100°C
Module of Elasticity 8000 N/mm² approx

Commercial & Marine Block Board

Used for furniture making, wardrobes, partitions and other interior works.

BLOCK BOARDS are available in both grades (Commercial and Marine). Battens are chemically treated and veneers are glue poisoned. Battens are made out of 100% selected species of hardwood. The wood planks are thoroughly seasoned in our ultra modern seasoning kilns and then cut with great precision to obtain battens with unmatched uniform thickness.

Commercial & Marine Flush Door

These are ready-to-use doors made out of high quality hard wood, they are exceptionally durable and dimensionally stable - with unmatched finishing properties. The cross-bands are sourced and crafted from selected hardwood species that are uniformly dried to the requisite moisture content to increase durability.

Decorative Plywood

Made from natural veneers of Indian and imported variety, our plywood offers gradient surface and dimensional stability. The chemical treatment against termites, fungus and borers ensures that our plywood remains for ever. Our plywoods are remarkably strong and extraordinarily durable. It is not surprising that our brands are the first choice for interior designers, builders and carpenters. Available in Natural Teak, Italian Teak, Ash, Olive Ash, walnut etc.

Chequered Plywood

We manufacture a multitude of chequered plywood that meets the specifications of the purposes it serves. Our team of workers take great care in manufacturing our spectacular range of chequered plywoods that is tested for quality at each level of its production. Our customers can avail our exotic range of chequered plywoods in the required sizes.